1110014 Natural Stain Remover made by SeaKlear
Natural Stain Remover?é is a natural alternative to stain removal, without sacrificing performance and ease-of-use. It effectively removes most stain-causing metals, without harsh synthetic chemicals.Quick Facts:
- All natural stain removers
- Works on all surfaces including vinyl and fiberglass
- Removes metal and organic stains
- Made in the United States
Directions for Use:Before using SeaKlear Natural Stain Remover, make sure your pool is properly balanced. Calcium hardness and total alkalinity should be within recommended ranges (check with your local pool professional for the ideal levels for your area).
- Adjust pH to a minimum 7.4
- Circulate the pool for 1 hour, then turn the pump off.
- Allow water to become still
- Sprinkle the granules over the most heavily spotted areas. Use 1 lb. for ever 10,000 gallons of pool water.
- Let the solution sit for 1 hour, then run the pump.
- Check calcium hardness and alkalinity levels. Balance the water if necessary
- Follow up with SeaKlear Metal Klear at a rate of 1 qt. per 10,000 gallons.
- Clean filter 24 hours after treatment.
WARNING: Product(s) shown and sold in the website and in store can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to 
Grace R.
Well done!
Eric V.
Well done!