Dynamite Pool Underwater Patch 9 lb. made by SGM PLBPP49
Dynamite Pool patch is a mixture of speciality cement and proprietary additives that permits underwater patching and general concrete repair work to be done instantly. Dynamite Pool patch can be used wherever a quick setting caulking or plugging material is needed.
To date, no specifications have been industry approved. Our material is tested and certified by independent laboratories. All data is given in good faith, however, we reserve the right to change products and specifications without notice. SGM advises interested parties to satisfy themselves as to the accuracy of any data and seek certification if appropriate.
USES:
- Underwater pool repair
- Underwater concrete repair
- New construction
- Remodeling
CHARACTERISTICS:
- High Strength
- Sets underwater
- Brilliant white
SURFACE PREPARATION:
Repair area must be clean and free of any paint, dust or grease, Chisel V-shaped channel to allow easy application wherever possible. Dampen area prior to application. When not underwater.
APPLICATIONS:
Mix approximately one (1) part water to three (3) parts pool patch or until material has a dough like consistency. Warning: Warm water will accelerate set time of patch. Mix only as much as can be used in 3-5 minutes. Using a steel trowel or pointed tool, force material into hole or crack. Dampen material for fifteen (15) minutes after patching to prevent cracking. To repair water leaks of for under-water use, apply pressure for a minimum of five (5) minutes or until material has firmly set.
WARNING: :
Eye Irritant Contains Portland Cement. Product is alkaline on contact with water. Use paddle for mixing to avoid splashing into eyes or contact with skin. During mixing or application, avoid contact with eyes. In case of such contact, flood eyes repeatedly with water and CALL PHYSICIAN. Wash thoroughly after handling and before smoking or eating. Do not take internally. KEEP OUT OF REACH OF CHILDREN.
Dynamite Pool Underwater Patch
Ryan Q. –
Super!
Philip K. –
Super!