JMIRON2 Jacks Magic The Iron Cobalt & Spot Etching Stuff 2lb.

Jack’s Magic Swimming Pool The Iron, Cobalt & Spot Etching Stuff Stain Solution #1 2lb. JMIRON2

Jack’s Magic The Iron Cobalt & Spot Etching Stuff Stain Solution #1 2lb. JMIRON2 is a non-acidic product for removing iron, cobalt, and spot-etching stains from all types of pool surfaces without draining the pool.

The Iron, Cobalt & Spot Etching Stuff will normally remove these stains easily and effectively within 48 hours, with minimal rebalancing of other pool chemical products.

Jack’s Magic The Iron Cobalt & Spot Etching Stuff Stain Solution #1 2lb. JMIRON2 Dosage

• 2 lbs per 12,000 gallons
• NOTE: The use of a sequestrant is required to filter out the stain.

Full treatment procedures for Stain Solution #1

Full treatment procedures for Iron Scale

Is it safe to swim after I use the Iron Cobalt & Spot Etching Stuff?
No. Do not swim while doing a #1 Treatment. You may swim after the stains have been removed and after your water chemistry is back to normal.

Help! My stains turned black after I used this product!
Your stains turned black because you have copper stains instead of iron ones. Please use Copper & Scale stuff.

How long will the treatment take?
Generally, if the chemistry is adjusted properly, a Stain #1 treatment should be fully reacted within 48 hours.

What happens during the treatment if my dog gets into the pool?
When doing a Stain #1 treatment there are no adverse conditions that would harm a pet. The reason we don’t advise swimming during a Stain #1 treatment is because the Chlorine level is lower than recommended levels for swimming.

When doing a #1 treatment, is it a good idea to wait for the Chlorine to come down on its own?
No. This is a common mistake made especially in the warmer months. By not using After Shock Chlorine Remover, you will create a significant chlorine demand which may create an algae problem. By using After Shock you can immediately lower the chlorine level and start the treatment the same day.

SDS Sheet