CVA-24T To Ortega Valve 2 in. Adapter Kit made by Pentair OVA2
APPLICATION:
Used to adapt Compool CVA-24T Valve Actuator to 2 Ortega 3-port valve.
KIT INCLUDES:
- Adapter Plate
- Cover O-ring Seal
- Cover O-ring Seals (3ea.)
- Shaft Coupling
- Shaft Coupling Mounting Screws (2 ea.)
- Valve Handle
- Valve Knob
INSTALLATION:
- Remove handle, cover, stop screw and o-ring seals from Ortega
Valve. Save cover screws. - Insert new O-ring Seals into bottom of Adapter Plate. Lubricate
Seals with Compool Silicone Grease. In retrofit applications, it
is advisable to remove the valve diverter and lubricate diverter
seal at this time.- Valves should be inspected and serviced at lease once a year. The valve diverter should be well lubricated, the O-ring seals should be intact, and the diverter should fit snugly and rotate smoothly
- Mount Adapter plate to valve, using the existing cover screws.
- Attach Shaft Coupling to valve shaft. ensure that pointer is
oriented in the direction of theopenvalve port. Secure
Coupling with Mounting Screws. Tighten Screws completely. - Attach Valve Handle to Valve Actuator, and secure with Valve
Knob. - Connect cable between Valve Actuator, and Power Center.
Line-up and attach Valve Actuator to Shaft Coupling in this
position, reverse the cable plug on the side of the Valve
Actuator so that the Actuator rotates to the correct position. - Secure to Adapter plate with Valve Actuator Mounting Screws.
Pentair Adapter Kit, Size: 2 Inch, Includes: Adapter Plate, Cover O-Ring Seal, Shaft Coupling, Shaft Coupling Mounting Screws, Valve Handle, Valve Knob, For Use With: CVA-24T to Ortega(R) Valve, Actuator
Marilyn J. –
Super fast delivery
Walter G. –
Super fast delivery