Control FF-1094TC made by Allied Innovations 910106-007
CONTROL: FF-1094TC 120/240V 20A W/O BTN
Simple and reliable four function control for any 2 pieces of equipment operated by 1 air button. Control distance up to 150′ depending on air button used.
Replacement option for Len Gordon Co:
910006-001 FF-1000TC
910106-001 FF-1094TC
A wiring diagram is provided inside the door of each unit. Diagrams detailing typical installations are
shown below . THE POWER SUPPLY LlNE MUST BE CONNECTED TO THE BLACK AND
ORANGE LINE PIGTAILS IN THE UNIT, AND THE POWER SUPPLY NEUTRAL MUST BE
CONNECTED TO THE WHITE NEUTRAL PIGTAILS IN THE UNIT! Certain models may have
more or fewer terminals than shown below.
Input Service Ratings:
- 120 VAC, 16 A, 1 HP, 60 Hz, 2 wire plus ground or –
- 240 VAC, 16 A, 2 HP, 60 Hz, 3 wire plus ground.
Output:
Maximum Output Ratings for Motor or Resistive Load Only-if two output circuits are used, the
combined total of both circuits shall not exceed the ratings noted below:
- 120 V, 16 FLA or; 240 V, 12 FLA and 240 V, 16 A Resistive.
Note:
Model FF-1094-the jumper across terminals 4 and 5 will operate the pump continuously. If this is not
desired, remove the jumper.
Installation
Caution: Use Copper Conductors only. Do not lubricate relays.
Albert C.
Nice job!
Heather S.
Nice job!