Pentair Chlorinator 320 and 322 Flow Indicating Device R172276
#320 and #322
- Remove 90° tube fitting from bottom tee assembly.
- Screw bottom nipple of flow indicating device into opening in bottom tee
fitting. See illustration. Do not over tighten. - Thread 1/2 in T X T coupling onto top nipple of flow indicating device. Do not
over tighten. - Thread 90° tube fitting into open end of coupling. Do not over tighten. Slide
black nut over tubing. Slide tube over tapered end of 90fitting and secure
with nut. - Finish installation of chlorinator following installation procedures of
#320 or #322 instruction sheet.
NOTE:
- All pipe threat connections use 3-4 wraps of teflon thread sealing tape.
- DO NOT use teflon tape on black nut connections of 90tube fittings.
Reviews
There are no reviews yet.