PS-200 Pentair Challenger SuperFlo VS Pump Shaft Seal Set 354545S

 Shaft Seal Set for Pentair Challenger, Pinnacle, SuperFlo, SuperFlo VS Pumps PS-200 354545S

INSTALLATION INSTRUCTIONS FOR REPLACEMENT SEALS

1. Disassemble pump cavity to expose defective seal. Removal of old seal and
   installation of new seal requires careful operations and precautions.
   CAUTION: Lapped and polished faces of new seal are easily scratched and
   damaged. PROTECT FROM DAMAGE, DIRT and FINGER PRINTS.
2. Carefully remove old seal head and seat taking care not to scratch shalt or seat
   counterbore. NOTE HOW OLD SEAL IS ASSEIVIBLED. BE SURE REPLACE
   MENT SEAL IS INSTALLED IN IDENTICAL MANNER.
3. Clean shaft and counterbore surfaces using fine emery cloth or equivalent
   Remove rust, burrs, and wipe clean.
4. Shaft, seat counterbore and rubber members of seal head and seat should be
   lubricated with a lubricant compatible with the seal elastomers. U.S
   SEALUBE is recommended and available from US Seal. U.S. SEALUBE is a
   WATER BASED formula specifically designed to lubricate rubber making the
   installation of mechanical seals fast and easy. It provides a high degree of
   lubricity to all rubber components. It maintains its wetness for a short period of
   time allowing for easy installation of a mechanical seal. NEVER use PTFE or
   SILICONE based lubricants.
5. Check seal surfaces to be sure they are free of any dirt, grit or lubricants.
6. Press seal seat firmly into counterbore to be sure it is bottomed square. SLIDE
   SEAL .HEAD ALONG SHAFT MAKING SURE THAT SPRING IS
   CORRECTLY ENGAGED INTO SEAL.
7. Re-assemble pump and remember that trouble free operation of a pump
   includes making a correct seal installation.

Pentair Type 6 Mechanical Seal Set, Size: 5/8 Inch, For Use With: Waterfall(R) Specialty Pump, Challenger(R) High Flow and High Pressure Inground Pump