OEM Hayward Original Ignitor Silicon Nitride 768A-006 1503042201 IDXL2IGN1930

Hayward Heater Silicon Nitride Ignitor IDXL2IGN1930

Used on the following models:

• H250IDL2, H350IDL2 and H400IDL2

To replace Hot Surface Ignitor:

1. Turn pump, main gas valve, and heater power off.
2. Remove front access door.
3. Disconnect igniter leads plug from wire harness plug.
4. Remove two screws that fasten ignitor.
5. Replace defective ignitor and reverse the above procedure.

---